Saw Guide

  • Type:
  • Subjects: Arts and Crafts, Tools
  • Created with: Unspecified
  • Language: English
  • Created by: Bartimeus_3Dlab

Description of the model

A Saw guide made for a hand saw. This aid can be used on wood beams or plates <20 mm. Use a vice to cut panels under 20 mm thickness. 

saw guide in use
saw guide example

Printing instructions and tips

A layer height of around 0.2 gives adequate results. Use a high infill number =>60% for optimal strength.  There is no support needed for this model; a brim is recommended.

Note: the 45-degree angle might have a sharp edge after printing. Trim or sand the edge to ensure safety precautions.

Downloads

  • 01_B006-Zaaghulp-file-1.stl
    • Download All

    Preview

    Loading file
    • Fullscreen
    • Wireframe
    • Zoom In
    • Zoom Out
    • Rotation
    • Screenshot
    • Help

    Controls

    ×
    • Rotate with the left mouse button.
    • Zoom with the scroll button.
    • Adjust camera position with the right mouse button.
    • Double-click to enter the fullscreen mode.
    • On mobile devices swipe to rotate.
    • On mobile devices pinch two fingers together or apart to adjust zoom.
    • On mobile devices 3 finger horizontal swipe performs panning.

    Additional Models

    Similar Posts:

    12 sides dice with plates12 Sided Dice (8dot braille) Tectonic Plates Dice and all tiles20 Sided Dice (8dot braille) Eye 1

    tactiles.eu has been produced by the 3D4VIP project co-funded by the Erasmus+ programme of the European Union