Rotating Braille Dice with all 26 letters (8 point Braille)

Description of the model

After the wheel of fortune has been set in motion, it runs for a while and stops on a letter. It is reliably locked in place by magnets. The turned letter is read off at the top.

Printing instructions and tips

Attention: The model is complex to produce.

  • 2x 26 magnets must be glued into the wheel of fortune with superglue (disc magnets with a diameter of 5mm and a thickness of 1mm).
  • All parts must be printed with infill
  • The disc and the side parts are needed 2x each
  • The wheel of fortune is glued with superglue during assembly
  • The strength of the brake can be adjusted with 1-3 magnets each on the left and right side. These must also be glued in place with superglue.

Downloads

Preview

Loading file
  • Fullscreen
  • Wireframe
  • Zoom In
  • Zoom Out
  • Rotation
  • Screenshot
  • Help

Controls

×
  • Rotate with the left mouse button.
  • Zoom with the scroll button.
  • Adjust camera position with the right mouse button.
  • Double-click to enter the fullscreen mode.
  • On mobile devices swipe to rotate.
  • On mobile devices pinch two fingers together or apart to adjust zoom.
  • On mobile devices 3 finger horizontal swipe performs panning.

Additional Models

  • Wheel-of-Fortune_part-1.stl
  • Wheel-of-Fortune_part-2.stl
  • Wheel-of-Fortune_part-3.stl
  • Wheel-of-Fortune_part-4.stl
  • Wheel-of-Fortune_part-5.stl
  • Wheel-of-Fortune_part-6.stl
  • Related Posts