Two-Coloured Game Dice

Description of the model

The dice eyes are very good to touch and visible. They are slightly recessed so that the dice does not tilt on them.

Due to the rounding of the corners, the dice rolls very well. Ideal on a soft surface made of felt, fabric or similar (e.g. dice board).

The dice and the plates are printed separately and then glued together with a drop of super glue.

Printing instructions and tips

The dice must be printed with about 5% filling. More filling makes the dice heavier, which makes it roll even better. Supporting structure on the bottom side is recommended, because then the platelet can be glued on better.

Ideally you change the filament after 0.4mm for a better contrast (I print the first layer with 0.3mm and then with 0.1mm -> so change after layer 2). This technique is described
(headline “Multicolour printing by changing the filament”).



Loading file
  • Fullscreen
  • Wireframe
  • Zoom In
  • Zoom Out
  • Rotation
  • Screenshot
  • Help


  • Rotate with the left mouse button.
  • Zoom with the scroll button.
  • Adjust camera position with the right mouse button.
  • Double-click to enter the fullscreen mode.
  • On mobile devices swipe to rotate.
  • On mobile devices pinch two fingers together or apart to adjust zoom.
  • On mobile devices 3 finger horizontal swipe performs panning.

Additional Models

  • Dice.stl
  • Dice_1.stl
  • Dice_2.stl
  • Dice_3.stl
  • Dice_4.stl
  • Dice_5.stl
  • Dice_6.stl
  • Related Posts